Archive for the 'News' Category

UK ENGINE INVESTMENT BY JCB SET TO CREATE HUNDREDS OF NEW JOBS

JCB – the world’s third largest manufacturer of construction equipment – today announced plans for a new $48.5 (£31) million engine development project in the UK that will create around 350 jobs throughout the region.

The program is set to get underway after the company was awarded $7 (£4.5) million towards the cost from the Government’s Regional Growth Fund (RGF).

Design and research into the new engine project will take place at JCB Power Systems in Foston, Derbyshire, where the company’s record setting JCB Dieselmax engine is manufactured.

The development of the new engine – which will be installed in JCB’s own products and also sold to third parties – means almost 50 new advanced engineering jobs are available immediately at JCB Power Systems, with recruitment already underway.

The roles include engine design and development engineers, engine electronics and software engineers, quality technicians, manufacturing engineers, applications engineers, supplier development engineers and buyers. When the engine goes into production, more than 300 additional jobs will be created across JCB’s Staffordshire, Derbyshire and Wrexham factories between 2016 and 2021.

JCB Chief Executive Alan Blake said: “Since we began production in 2004, JCB has led the way in off-highway engine development, with a range of fuel saving, clean and highly efficient engines.

“The announcement that we now intend to invest £31 ($48.5) million developing our next generation engine is an important step in building on the success we have enjoyed so far and it will take the efficiency, productivity and environmental performance of our engines to new levels.

“The new JCB engine will give our products a huge competitive edge across global markets which we anticipate will lead to substantially increased sales between 2016 and 2021.

“That rise in demand will result in the creation of an additional 300 positions at our UK factories in addition to almost 50 engineering roles we are recruiting for immediately.”

JCB began manufacturing its Dieselmax engine range at its Derbyshire plant in 2004. This year the company also opened a new engine production facility in India for the production of fuel-efficient engines for its Indian-built products.

JCB’s own engines now power more than 70% of the company’s equipment range.  The same engines also powered the JCB Dieselmax car to a new world diesel landspeed record of 350.092mph on the Bonneville Salt Flats, USA in 2006.

Last year JCB announced it had made one of the biggest investments in its history to develop the off-highway sector’s cleanest engine, in readiness for increasingly stringent emissions legislation in both the United States of America and in Europe. The move has been well received by original equipment manufacturers (OEM) from around the world, with a surge in demand for the award-winning JCB Ecomax T4 engine range.

The company has recently developed the new JCB Ecomax T4 4.4 litre engine – the latest generation of the JCB Dieselmax engine. The investment has delivered an industry-first solution that eliminates the need for any exhaust after-treatment and delivers cost savings for customers. Indeed the 55kW (74hp) Ecomax engine requires no after-treatment for Tier 4 Final.

Comment on this Post
Bookmark and Share

CBE HONOR FOR JCB’S DEPUTY CHAIRMAN JOHN PATTERSON

John Patterson, Deputy Chairman of JCB, has been appointed as a Commander of the Most Excellent Order of the British Empire (CBE) in the Queen’s Birthday Honors List. The honor has been awarded to Mr Patterson in recognition of his services to British business development worldwide.

John Patterson, Deputy Chairman of JCB, awarded CBE Honors

Patterson said, “I am extremely humbled by this announcement. I am very proud to receive the honor and all that it represents. This is a tribute to the many people within the JCB worldwide organization, especially Sir Anthony Bamford. I would not have been able to achieve this without his faith in me and his leadership, guidance and wisdom.”

Patterson joined JCB in 1971 as a field service engineer and rose to Worldwide CEO overseeing global operations for the world’s largest privately owned construction equipment company.  With offices on four continents, Patterson has travelled extensively to build JCB’s global expansion.  Under the last 5 years of his worldwide leadership, retail sales increased by 98 percent and revenue increased by 107 percent.  In the last ten years, Patterson has opened new manufacturing facilities in Savannah, Georgia; Sao Paulo, Brazil; Pune, India; Shanghai, China; and acquired operations in Germany.

With Patterson at the helm, JCB’s global market share rose to 12 percent, JCB earned and maintained the number one market share position for backhoe loaders and telescopic handlers globally and JCB upheld its position as the world’s 3rd largest construction equipment manufacturer by volume.

JCB Chairman Sir Anthony Bamford said: “John’s contribution to both JCB and British business over the past 40 years has been immense and I am delighted that he has received this well-deserved recognition.”

His dedication to the industry extends beyond his role at JCB. In 2007 Patterson was elected to the Association of Equipment Manufacturers’ (AEM) board of directors.   AEM is the international trade and business development resource for companies that manufacture equipment, products and services used worldwide in the construction, agricultural, mining, forestry, and utility fields. He is a member of the Georgia Institute of Technology Advisory Board in Atlanta as well as Chairman of the Savannah affiliate board.  He is a former president of the Federation of Manufacturers of Construction Equipment and Cranes (FMCEC).

Honors Lists are published twice a year at New Year and in mid-June on the date of The Queen’s official birthday.  All honorees have been through a rigorous selection process overseen by Cabinet Office committees before their name is recommended to The Queen by the Prime Minister to be included in the Honors List.  Patterson will receive the Honor at Buckingham Palace later in the year.

Comment on this Post
Bookmark and Share

JCB WELCOMES GEORGIA GOVERNOR NATHAN DEAL TO ITS WORLD HEADQUARTERS

Visit builds relationships and creates a solid foundation for future growth in Georgia

Leading heavy equipment manufacturer JCB welcomed Georgia Governor Nathan Deal to its World Headquarters in Rocester, Staffordshire, England on Tuesday the 17th of May. The governor was accompanied by Chris Cummiskey, commissioner, and Gretchen Corbin, deputy commissioner, both of Georgia’s Department of Economic Development. The visit to JCB is one stop on the Governor’s nearly two-week-long economic development trip to Europe.

Gretchen Corbin, Mike Harling, John Patterson, Governor Nathan Deal, Graeme Macdonald and Chris Cummiskey stop for a photo at the start of the JCB Backhoe production line

By visiting with JCB and other European companies with Georgia ties, Governor Deal and his staff plan to build strong relationships, promote the State as a solid location for new businesses or expansions and learn tactics that will have a positive impact on Georgia’s continued economic growth.

“Since selecting Savannah as the site of its North American headquarters, JCB has continued to invest in Georgia by expanding its product lines, hiring additional employees and creating valuable partnerships,” said John Patterson, chairman of JCB North America. “Today’s meeting with Governor Deal gave us the opportunity to share our vision and discuss strategies to promote even more economic growth.”

Chris Cummisky and Governor Nathan Deal listen as Graeme Macdonald explains the JCB manufacturing process

Following their arrival at JCB World Headquarters, Governor Deal and his staff took a tour of the facility, seeing firsthand where the world’s best-selling backhoes and Loadall telescopic handlers are produced. Upon the tour’s conclusion, the governor enjoyed a working lunch with John Patterson and Sir Anthony Bamford, chairman of JCB worldwide. The three discussed JCB’s continued potential for growth in Georgia, including JCB’s plans to add 200 more jobs in Savannah in the near future.

“JCB has contributed and continues to contribute a great deal to the city of Savannah and the entire state of Georgia,” Governor Deal said. “To have a global organization like JCB locate its North American Headquarters in Georgia says so much about our state’s many strengths—its prime location, its dedicated workforce and its growing economy, just to name a few. I enjoyed meeting with JCB’s executives, learning more about the company’s future plans and developing sound relationships that will serve us well in the months and years ahead.”

Governor Nathan Deal listens as John Patterson outlines JCB's group operations

JCB is certainly well-positioned to have a positive effect on Savannah’s economy, and its overall growth strategy has the potential to make an impact outside of Georgia as well. The company is expanding its dealer network and opening additional distribution centers throughout North America.  “Because of our global perspective, we can play an active role by offering our unique insight into current and future economic development issues—not just locally, but also regionally and nationally,” Patterson added. “We hope to use this knowledge to assist Governor Deal and his staff as they continue to pursue their economic development goals.”

Comment on this Post
Bookmark and Share

JCB DONATES THE USE OF EQUIPMENT TO ASSIST GEORGIA AND ALABAMA CLEAN-UP EFFORTS

Heavy equipment manufacturer provides skid steers and backhoe loaders to clear debris and begin the recovery process.

Leading heavy equipment manufacturer JCB has donated the use of various machines to assist with clean-up efforts in Georgia and Alabama following the violent storms that rocked the region on April 27, 2011. According to JCB North America Chairman and CEO John Patterson, the company’s latest donations reflect its ongoing support of disaster relief efforts worldwide.

“As a global organization, JCB has assisted with relief efforts in a number of countries over the years,” Patterson said. “The residents of Georgia and Alabama are JCB’s neighbors here in the United States, and upon learning of the devastation left behind by the recent storms, we knew that we wanted to help them in any way we could.”

In these situations, the type of equipment that JCB manufactures is necessary to clear tree and building debris from roads and driveways so that recovery and rescue efforts can take place. After hearing of the widespread damage throughout the Deep South, JCB employees in Savannah and dealers in Georgia and Alabama devised plans to donate the use of heavy equipment to launch the long recovery process in the areas hardest hit by the powerful storms.

JCB’s Savannah Employees Step Up

Spencer Howard, a member of JCB’s demonstration crew based at the North American Headquarters in Savannah, Ga., came up with the idea to take a JCB New Generation 280 skid steer loader with fork, bucket and grapple attachments to Ringgold and begin clearing roadways. Howard ran the idea past Neil Smith, JCB’s events and demonstration manager, who fully agreed with his plan.

JCB demonstrator Spencer Howard uses a New Generation 280 skid steer to clear debris in Ringgold, GA

Howard became part of a volunteer crew that worked from daylight to dark, Friday, April 29 through Sunday, May 1, using the JCB 280 skid steer’s speed and maneuverability to clear as much debris as possible. “I have family in that area, and I felt like it was my responsibility to help out,” Howard said. “We saw houses torn from their slabs, an entire golf course development where none of the homes remained. The devastation, what those people are experiencing right now, was unbelievable. When I had to leave, people I didn’t even know hugged and thanked me. That made the entire trip worthwhile.”

JCB of Alabama Lends a Helping Hand

Peter Cunningham, JCB’s district manager in Alabama and Florida, knew that it was important for JCB to step up in this time of crisis.  Together with Mark Long, president and owner of JCB of Alabama, the two were able to secure a 3CX backhoe loader from JCB’s Savannah headquarters to assist in the Alabama relief efforts.

A donated JCB 3CX backhoe loader works to clear roads in Alabama following the tornados that ripped through the Southeast

The 3CX’s front end loader is perfect for debris collection, while the reach of its excavator end allows the unit to be used to extend over debris piles. The dealership received the backhoe on May 10, and municipal workers in surrounding communities will use it to continue clearing debris.

“We wanted to get machines where they were needed most,” Cunningham said.  “By working with JCB of Alabama, we were able to immediately provide the use of a 3CX to the City of Dora for its recovery and clean-up process.”

Long knew that his dealership would step up in this time of crisis. “In our line of work, it’s normal for us to receive calls for assistance when natural disasters take place,” Long explained. “As a company, we try to use whatever equipment we have in our yard to help out as quickly as possible. We were extremely grateful that JCB came to us with the idea of donating the use of a 3CX, because the more machines that we can offer to the local municipalities, the faster we can help the residents of those areas recover from this disaster.”

In addition to the City of Dora, JCB of Alabama donated the use of its equipment to the communities of Fultondale and Hueytown. “While it’s very important for the larger metropolitan areas like Birmingham to receive assistance, we also wanted to ensure that smaller towns and cities are getting the help they need.”

JCB of Georgia Partners with Ringgold Area Contractor

A dealership located right next door to JCB’s North American Headquarters in Savannah, JCB of Georgia also expressed its desire to help the victims of these violent storms. “We knew we wanted to donate the use of a machine, but we needed to find a contractor who was willing to volunteer his time to operate it,” said Natalia Welch, marketing manager for JCB of Georgia. “That’s when we contacted David Mills.”

David Mills owns and operates David Mills Construction in Ringgold, Ga., building new homes and remodeling existing ones. “I’ve purchased three backhoes from JCB in the past, so they know me,” Mills said. “When they contacted me about relief efforts, I’d been using my own equipment to try and help out, but the use of the donated 3CX backhoe has helped us remove even more debris in less time.”

Mills will use the 3CX from JCB of Georgia to clean up and separate tree debris from building scrap material—a long and arduous process. “The people here in Ringgold are my friends and neighbors, and they simply need my help,” Mills said. “They need to be able to get to their home sites and salvage what’s left, and clearing debris is the least that I can do for them.”

A Global Company with a Global Perspective

JCB’s equipment donations in Georgia and Alabama are the latest in the company’s long history of philanthropic endeavors. In 2010, JCB sponsored the “Backhoe Across America” charity drive in an effort to raise funds for Haiti following its devastating earthquakes. That same year, JCB donated $150,000 worth of equipment to Haiti for clean-up and relief efforts. Also in 2010, JCB pledged assistance worth over $100,000 for rebuilding efforts in Chile after its disastrous earthquakes. Other past donations include the gifting of six backhoe loaders and a team of operators following the 2008 earthquake in Sichuan Province in China. JCB also donated machines worth more than £1 million to help in the aftermath of the Asian Tsunami in 2004, with JCB diggers deployed to Thailand, southern India, Sri Lanka and Indonesia.

“Our global presence makes us acutely aware of the need to support our partners, friends and neighbors, wherever they may be,” Patterson explained. “It’s our hope that these donations will continue to make a positive impact upon the lives of those people who have been affected by these natural disasters.”

Comment on this Post
Bookmark and Share

BIG ROLE FOR SMALL FLEET OF JCB MACHINES IN EARTHQUAKE-HIT HAITI

A small fleet of powerful JCB machines is playing a big role in paving the way for rebuilding in part of earthquake-devastated Haiti.

The JCB JS220XD at work in Haiti.

Two JCB excavators and a wheeled loading shovel have been bought by the international charity Oxfam and donated to the not-for-profit organization Disaster Waste Recovery (DWR) which is clearing damaged houses and recycling the resulting debris in one of the poorest areas of the Caribbean island’s capital Port Au Prince.

The JCB JS220XD and JS145W excavators and JCB 426ZX machines are working in partnership demolishing damaged properties and loading a crusher and screening plant. The resulting debris is then recycled and used in the reconstruction of buildings, roads and pavements.

The JCB 426ZX wheeled loading shovel is loading a crusher and screening plant in Haiti.

The order – which was won in the face of competition from other major global manufacturers – also included a JCB HM1560Q Hammermaster breaker and a JCB MP200U multi-processor attachment for use on the JS220XD and a JCB HM860Q Hammermaster breaker for the JS145W. JCB also provided seven days’ on-site operator training in Haiti.

Oxfam’s Logistic Co-ordinator in Haiti Hubert Ballaman said: “The location where the JCB machines are working is in the town and often in-between houses and the decision on which houses are demolished is often down to local residents who request their plot to be cleared.

“This particular part of the project should see 162,000 tonnes of rubble cleared, allowing 16,200 people to be re-housed in 4,500 properties.

“The team is working in very difficult conditions; it’s busy, hot and dusty and controlling lots of curious passers-by can be an issue for the operators and residents.

“All the operators are very pleased with the JCB machines and they particularly appreciate their ease and precision of operation and working in an air-conditioned cab with a comfortable seat.”

The JCB JS220 XD at work in Haiti.

The demolition and clean-up operation follows the earthquake on January 12, 2010 which measured 7.0 on the Richter Scale and killed an estimated 230,000 people. More than a year later, 800,000 people are still living in camps.

Immediately after the earthquake, JCB Chairman Sir Anthony Bamford donated two JCB 3CX backhoe loaders worth $150,000 to help with the relief effort. They are currently working for not-profit organization Food for the Poor and have so far been deployed to clear rubble, excavate sewage pits, dig out foundations and reconstruct walls and build schools and sanitation facilities.

The UN Development Program estimates that 200,000 buildings collapsed in Port au Prince, creating 10 million m³ of rubble – only 20 % of which has so far been cleared. DWR’s project is financed by Oxfam GB with funding from the UK‐based Disasters Emergency Committee and is working in neighborhoods of Port‐au‐Prince, demolishing damaged buildings and clearing away debris, so that people can return to their homes. DWR is a specialized UK‐registered not‐for‐profit organization that focuses on designing and implementing waste and debris management projects in post‐disaster and post‐conflict situations.

Comment on this Post
Bookmark and Share

JCB ANNOUNCES THE ADDITION OF NEW WEST COAST PARTS DISTRIBUTION CENTER

New California-based distribution center will provide North American customers with faster parts availability and lower freight costs

JCB today announced the opening of a new West Coast Parts Distribution Center in Fontana, California, bringing its total number of distribution centers in North America to three.

New JCB parts facility in Fontana, CA

The new facility is part of JCB’s ongoing commitment to enhance customer support in North America. The distribution center will primarily serve customers in the Mountain and Pacific Time Zones, helping to reduce freight costs and shorten delivery times. JCB’s other North American parts distribution centers are located in Burlington, Ontario and Savannah, Georgia.

“As we expand our North American Dealer Network, it’s important for us to continue providing each of our customers with the parts they need as quickly as possible,” said John Patterson, chairman and CEO of JCB Inc. “At JCB, we understand that time is money, and with this new distribution center, our customers will be able to benefit from less equipment downtime and enjoy greater productivity on their job sites.”

JCB will use SAP® inventory management solutions and Syncron® global supply chain management software at its West Coast Distribution Center, bringing it in line with all of JCB’s distribution facilities around the world.

While the new distribution center certainly supports JCB’s customer support philosophy, it also underscores the company’s strong global commitment to the environment by promoting more sustainable practices.

“The world is changing, and we need to realign our responsibilities accordingly,” Patterson said. “That includes placing a greater emphasis on environmental stewardship and sustainability. Our new distribution center will allow us to ship parts shorter distances, reducing fuel consumption and costs as well as the amount of pollutants created during the transportation process.”

JCB’s dedication to sustainability extends beyond its efforts to streamline parts availability. The company has developed a number of sustainable equipment innovations in recent years, including a 23-percent reduction in direct carbon emissions since 2007, and a 16-percent decrease in fuel consumption from its new and improved range of backhoe loaders and skid steer loaders.

“We’re confident that this new distribution center will enable us to better serve our growing customer base while also making it possible for JCB and its dealers to reduce their collective carbon footprint,” Patterson said.

Comment on this Post
Bookmark and Share

JCB ACADEMY OFFICIALLY OPENED BY ROYAL COUPLE

The £22 million JCB Academy was today officially opened by Their Royal Highnesses The Prince of Wales and The Duchess of Cornwall.

Sir Anthony Bamford shows HRH The Prince of Wales around the JCB Academy

The Royal couple visited the facility in Mill Street, Rocester where they met staff, students and supporters who have made The Academy such a success.

Prince Charles, accompanied by Sir Anthony Bamford and JCB Academy Principal Jim Wade, was given an insight into both the hi-tech resources available to the 170 Year 10 and Sixth Form students and The JCB Academy’s strong focus on energy efficiency, seeing first-hand an Archimedes Screw which has been installed and which generates around 80 per cent of the power for the site.

The Duchess of Cornwall meanwhile took time out to meet community groups linked to The JCB Academy and the building where it is housed. Pupils from Dove First School, Rocester, performed a dance routine for the Royal visitor before she went on to meet Rocester residents who have a connection with the building.

The Royal couple later unveiled a plaque to mark the official opening of The Academy.

In a speech at the opening ceremony Sir Anthony Bamford said: “Over 200 years after Arkwright invented the spinning frame, his mill in Rocester is now home to a transformation – a revolution, some might say – in how our young people are educated.

“Our hope is that the engineers and business leaders of the future – that our country so desperately needs to rebalance our economy – will pass through the doors of this historic building.“

The JCB Academy is the first school of its kind in the UK for the education of 14 to 19-year-olds with a core focus on engineering and is designed to produce the engineers and business leaders of the future.

The rear of the new JCB Academy

The engineering tasks completed by pupils have been set by The JCB Academy’s partners who include JCB, Rolls-Royce, Toyota, Network Rail, Bentley, Bombardier, Rexroth Bosch Group, National Grid, Zytek Automotive, the Institution of Mechanical Engineers, IET, Harper Adams University College, The Royal Academy of Engineering and Parker Vansco. They will complete their engineering tasks alongside Maths, English, Science and German GCSEs.

Comment on this Post
Bookmark and Share

BLACK JCB BECOMES NEWEST MEMBER OF JCB’S NORTH AMERICAN DEALER NETWORK

New dealer to provide JCB equipment and service from three locations

SAVANNAH, GA JCB’s North American dealer network has expanded once again with the addition of Black JCB, a new division of Black Equipment Company. Black JCB will now provide new and used equipment sales and rentals to the materials handling and construction industries along with 24-hour parts and service. In addition to the company’s headquarters in Evansville, IN, Black JCB also has locations in Hopkinsville, KY and Paducah, KY. According to Scott Bonnell, President of Black JCB, aligning with JCB was the right fit for his organization.

“By becoming a JCB dealer, we’re expanding our product offering to both new and existing customers,” Bonnell explained. “We’re impressed with JCB’s quality machines and their leadership within the global construction equipment market. As the leaders in our local market, it just makes sense for us to join forces with JCB.”

L to R: Scott Bonnell, presindent of Black JCB and Jay Bonnell, sales manager of Black JCB

Founded by the late M.J. Black in 1956, Black JCB remains a family-owned company, now with 140 employees spread throughout its six Indiana, Kentucky, Illinois and Tennessee locations. Black JCB is the only locally-owned company in its region offering material handling equipment sales and service.  In fact, service is Black JCB’s number one priority, with a particular emphasis on flexibility and responsiveness.

“Our company’s focus has always been on service,” Bonnell said. “We have technical service employees on staff who have been with our company for over 30 years. As a result, our customers can rest assured that our technicians and salespeople will do whatever it takes to get them the best equipment for their needs and keep that equipment up and running for top performance and productivity.”

Black JCB’s headquarters is located in Evansville, IN, a city that’s considered a regional service center between the larger metropolitan areas of Indianapolis, IN; Nashville, TN; Louisville, KY and St. Louis, MO. The area is known for a variety of industries, including aluminum, plastics, automotive, pharmaceutical and agriculture. “Like other businesses throughout the country, companies in our area conserved money with fewer capital expenditures over the past few years,” Bonnell said. “However, we’re starting to see improvement, and we’re now forecasting slow, steady growth. “

“JCB is very pleased to bring a quality dealer like Black Equipment, or now Black JCB on board,” said John Patterson, chairman and CEO for JCB North America. “Over the years, its staff has built an outstanding reputation for providing quality sales and service, and I have no doubt that they will be excellent ambassadors for the JCB brand.”

To learn more about Black JCB, visit www.BlackJCB.com, call (888) 840-9737 or stop by its headquarters at 1050 N. Congress Avenue in Evansville, IN. For more information about JCB’s industry-leading equipment for the construction, agriculture, industrial and waste/recycling markets, or to find a dealer near you, call JCB’s North American Headquarters in Savannah at (912) 447-2000 or visit www.jcbna.com.

Comment on this Post
Bookmark and Share

JCB WINS MAJOR ORDER FROM SWEDISH MILITARY FOR HIGH-SPEED MACHINES

JCB has won a multi-million dollar order for its Savannah built high-speed military backhoe from the Swedish Army.

The Swedish Defense Materiel Administration (“FMV”) is procuring on behalf of the Swedish Armed Forces 10 High Mobility Engineer Excavators (HMEEs), which will be delivered by the end of next year in readiness to go into service in 2012. The units are currently in production at JCB’s Savannah facility.

The JCB HMEE is a high speed military backhoe produced in Savannah, GA

The deal signals another major success for the unique machine which went into production at JCB’s Savannah factory when, in 2005, the company won its largest ever military order  – worth a total of $230 million  – for up to 800 HMEEs from the United States Army.

John Patterson, Chairman and CEO of JCB Inc. says: “The HMEE is already in use for a number of armed forces around the world, including those in the US and the UK, so we’re delighted to have won another substantial order for this unique machine, which is exclusively manufactured here in Savannah. A number of other nations are also expressing strong interest in the HMEE so we are confident we will win more business in the future.”

In 2008, the British Army placed a $10.5 million order for HMEEs, which are now in service in Afghanistan.

Full production of HMEEs began in 2007 at JCB Inc in Savannah, Georgia. The machine combines the capabilities of the world-renowned JCB backhoe loader and the innovative high-speed JCB Fastrac agricultural tractor, which is the only tractor to have full suspension and anti-lock brakes. The objective of the HMEE concept is to have a machine capable of traveling at military convoy speed without the need for transportation by a truck and low-loader trailer. The top speed of the HMEE is 60mph (88kph).

The 17.5-ton machine has a 6.7- liter diesel engine, four-wheel drive, four-wheel steer, lift more than two tons and dig to a depth of almost thirteen feet. It is designed to be air-transportable by Hercules C-130 aircraft. Added to this, a theater proven crew protection package makes the HMEE a new force within military engineering.

Over almost 30 years, JCB has supplied 45 different military organizations across the world with more than 3400 JCB machines.

Comment on this Post
Bookmark and Share

JCB LAUNCHES NEW GENERATION SKID STEERS AND TRACK LOADERS

First JCB products to be designed, engineered and manufactured in North America

SAVANNAH, GA. (November 8, 2010)—JCB, one of the world’s largest heavy equipment manufacturers, has launched an exciting new line of highly productive and reliable skid steer loaders and compact track loaders. These “New Generation” machines are the first to not only be manufactured but also designed and engineered at the company’s North American headquarters in Savannah, Ga.

JCB Lanches 7 new models of skid steer and compact track loaders

John Patterson Deputy Chairman of JCB said: “North America generates 60 percent of the worldwide demand for skid steers and compact track loaders, so developing and producing the new generation of machines in Savannah makes perfect sense and has enabled us not only to meet the unique needs of the North American market but also develop a machine range that will have universal appeal.”

Today, JCB introduces a range of seven new skid steers- four wheeled and three tracked- in a range that will eventually grow to 18 models. All seven machines introduced today are vertical lift, which allows for increased capacity and more reach at maximum lift height. The models now available—the 260, 280, 300 and 330 wheeled skid steers and 260T, 300T, 320T compact track loaders—are large platform machines with rated operating capacities (ROC) of 2,600 lbs and above. With the introduction of the New Generation machines, JCB will be able to offer a complete range of wheeled and tracked machines, both radial and vertical lift, ranging from 1300lbs- 3500lbs.

The new generation machines benefit from a number of new features, including:

  • A tilting cab with increased service access
  • Multifunction joysticks
  • A hydraulic quick hitch
  • Isolated cab that is sealed and pressurized with reduced noise levels
  • Heated air-suspension seat with adjustable armrests
  • O-ring face seals for all hydraulic connections
  • A new range of more than 30 types of JCB attachments.

By combining JCB’s history of innovation with a number of additional enhancements, the New Generation machines offer an even wider range of benefits than the company’s previous skid steer and compact track loader product line:

o   Best-in-class visibility. The new vertical lift machines showcase JCB’s unique “PowerBoom” design, which uses a single arm, rather than the conventional two arm skid steer design. The JCB models do not require a torque tube across the back of the machine. Thus, operators can enjoy an unobstructed rear view and better all around visibility for unmatched job site safety and driver confidence. To further enhance visibility JCB has eliminated the mesh screen on the cab machines and replaced it with laminated glass.

o   Best-in-class serviceability. With O-ring face seal hydraulic fittings and a simplified design resulting in 38 percent fewer parts, JCB’s new machines are even easier to service.  A new tilting cab design gives technicians improved access to the machine’s power train and hydraulic components. The new models also feature a rear service door for easy access to the engine and daily checkpoints, a top-opening hood for radiator access and a hinged radiator for improved engine access.

o   Outstanding operator comfort. The new generation machines have a larger entry door and a 17% larger cab than previous models. JCB has also introduced multifunction joystick controls and an optional heated air-suspension seat with adjustable armrests, making JCB’s skid steers incredibly comfortable to operate. Redesigned control panels have been relocated from the lower console to the panels at the top of the cab to be within the operator’s line of sight. Other available creature comforts include cup holders, MP3 player compartment with charging outlet and auxiliary plug, optional stereo package and an electronic throttle.  Operators will also enjoy a quieter cab with noise levels at a very low 76dBa, an 85% improvement.

o   Versatility and performance. Switching to any of the machine’s impressive 30 attachment families is a snap thanks to a standard universal mechanical hitch or an optional hydraulic quick hitch.  Parallel lift and 2-speeds make it easy to maneuver around the job site and complete more tasks in less time, and with the introduction of an optional Smooth Ride System (SRS) transporting materials over rough terrain has been made easier.

o   Unmatched safety. As in previous models, the New Generation skid steers and compact track loaders feature a unique left side entry door that allows the operator to enter and exit the machine clear of the attachment and loader arm, making it the industry’s safest skid steer.

o   Exceptional value. Owning a JCB skid steer or tracked loader costs less due to increased productivity and serviceability. Overall fuel consumption has been reduced 15% equating to an estimated annual savings of more than $3,000 versus competitive machines (based on an off-road diesel price of $2.90).

JCB skid steers feature a unique PowerBoom design based on the same intelligent engineering as JCB’s market leading telescopic handler

“JCB has never shied away from innovation,” Patterson said. “Back in 1993, we introduced the industry’s first single-arm, or ‘monoboom’ skid steer, a safer, more productive machine that was based upon the same engineering principles as a telescopic handler, which also operates with a single boom. What seemed uncommon to others, JCB saw as common sense, and took the intelligent design of telescopic handlers and applied it to skid steer loaders.  Our New Generation skid steers and track loaders embody this same spirit of innovation while taking performance, productivity and safety to an even higher level.”

For more information about JCB’s New Generation skid steers visit www.JCBvision.com. For information on any of the company’s other industry-leading equipment for the construction, agriculture, industrial and waste/recycling markets, or to find a dealer near you, call JCB’s North American Headquarters in Savannah at (912) 447-2000 or visit www.jcbna.com.

Comment on this Post
Bookmark and Share